Our British partner has worked out a product range of paving and jointing mortars, including fine bedding concrete, slurry primer and rapid set joint grouts.

The bedding concrete provides a perfect bound base for natural stone paving and cobbles, concrete paving, flags and block paving. The slurry primer is used to provide exceptional bond between all types of stone surfaces and fine bedding concrete. Rapid set joint grouts are ideal for all pavements where a rigid or bound void-free joint is required. The whole product range is ideal to be used on pedestrian areas in the city centre, pavements as well as on roads.

Benefits of fine bedding concrete:

  • rapid setting – at the temperature of 20°C the area can be open to pedestrian traffic in 12 hours and to vehicular traffic in 24 hours
  • erosion resistant – helps to avoid increased point loads on slabs and consequent breakage
  • shrinkage compensated
  • can be laid from 10-75mm in one pass
  • conforms to the requirements of British standard BS 7533

Benefits of the joint grout:

  • rapid setting – at the temperature of 20°C the area can be open to pedestrian traffic in 1 hour and to vehicular traffic in 4 hours
  • thanks to high fluid consistency fills the joint completely
  • can be used inside, as well as outside
  • can be applied also in wet conditions
  • resistant to deicing salts
  • exceptional bond strength
  • shrinkage compensated
  • single component – add only water and mix
  • can fill joints from 5mm-50mm and joint depths of up to 200mm in one pour
  • health and environmental friendly as does not contain resin
  • conforms to the requirements of a British standard BS 7533